Setting up Atlas - Atlas Chiropractic Systems

To begin, we need to turn on the CLA integration feature in Atlas. Part of this process is to also configure a PC in your network to run the sync program. The CLA sync program runs 'in the background' when Atlas is running on the specified computer, more about this later.

First, we need to go to Setup > Initial Setup > System Settings.

Click Imaging/Articles > Using Millennium
NOTE: be sure the Import Folder is also set to ./MillenniumData (this is default)

Now that Atlas knows that you will be using Millennium, you now need to tell Atlas which room will be responsible to handle importing all the images from Millennium into the correct patient files.