Testing the Calling Feature - Atlas Chiropractic Systems

The final step in setting up and configuring the Calling Module, is testing.

1. Start Atlas at the Front Desk – be sure your Rooms are Available for Calling

2. Ensure the ‘Calling Computer’ is turned on and the speakers are working

3. Start the Assign Module on the Calling Computer

4. Choose a test Patient – be sure you have recorded a sound for that Patient

5. Sign the Patient into the System – note if the Patient is ‘on hold’ for any reason

6. Listen for Calling – take into consideration any delays you programmed

You should hear the Patient name and Room over the speakers

You should also see the Patient name move from the Queue to the specified Room (highlighted in

Yellow)

7. If this doesn’t work, refer to this manual for assistance